Transmodulators with Common Interface are provided with two (GTE-2S14T) or three (GTE-3S14T) DVB-S/S2 inputs, for different sizes of CATV systems.
Both models can decode up to 10 pay-per-view satellite services and provide four DVB-T/C output channels, to be chosen in the whole Television RF range.
|INPUT NUMBER||2 (GTE-3S14T) or 3 (GTE-2S14T)|
|COMMON INTERFACE||1 (FlexCAM)|
|OUTPUT STANDARD||DVB-T or DVB-C|
|OUTPUT CHANNELS||4 (on adjacent frequencies)|
|COMMUNICATION PORT||LAN RJ45|
|MANAGEMENT SOFTWARE||GDS Manager|
|REMOTE CONTROL||Yes, using Cloud service|
|ADVANCED SETUP FUNCTIONS||PID filtering, PID remapping, Hotel mode, LCN check, NIT customization|
|MAINTENANCE FUNCTIONS||Configuration backup/restore, log, installation report, firmware update, device reset|
|MANAGEMENT FUNCTIONS||Setting protection password, Cloud user account|
Flexibility Each SD/HD service received from one of the inputs can be transferred to any output channel; the CAM module can decode services coming from any input.
PID filtering: To efficiently exploit the bandwidth, only relevant PIDs can be selected when adding a service to an output channel.
PID remapping and NIT customization: PIDs values are remapped when a service is added to ouput. Every channel's NIT table can be fully customized..
Hotel mode: Services transmitted on an output channel are arranged in a list, where each position has defined values for Service ID, PIDs, LCN. Each service added from an input acquires the values belonging to the selected position: this way the actual services associated to an output list can be changed with no need for TVs to be tuned again to receive the new services. This function is very useful in Hotels where a channel list must be switched according to customer nationality and interests.
Parental Control: Parental control can be applied to output channels.
Backup/restore: A module configuration can be saved and applied later on the same device or on a compatible one.
Maintenance: Factory reset, reboot, firmware update can be executed using the control software.
Management: Device log can be displayed and downloaded; also an installation report is available for downloading.
Integrated remote access: GTE modules can be programmed using LAN connection and the GDS Manager software. Remote control is provided using the same software and a free Cloud service.
Made in Italy: GTE transmodulators are designed and produced in Italy by GD Service.